-----------------------------------------------------------------------------------------------------
------------------------------------- Videokernel startup -------------------------------------------
-----------------------------------------------------------------------------------------------------

1/1/2002 01:00:55 | server name: [SHS4000]
1/1/2002 01:00:55 | version: 4.4.1 (Oct  1 2012, 13:58:53)
1/1/2002 01:00:55 | initialize system startup   please wait ... 
1/1/2002 01:00:56 * ---------------------------------------------------------------------------------------------
1/1/2002 01:00:56 * ----------------------------------------- Status -----------------------------------------
1/1/2002 01:00:56 * Booting ...
1/1/2002 01:01:00 | HWCheck : Controller open Itlcd o.k.
1/1/2002 01:01:01 | remote started
1/1/2002 01:01:01 | available job disk space for D:\JobPath: 410 MB
1/1/2002 01:01:01 | available system disk space: 132 MB
1/1/2002 01:01:01 | License : Register Interface (CAN (Ut) PU:8);
1/1/2002 01:01:01 | License : Smart Register
1/1/2002 01:01:01 | License : Virtual Repeat
1/1/2002 01:01:01 | Booting video kernel ...
1/1/2002 01:01:01 | system ident: 00e0f41f9137
1/1/2002 01:01:01 | save restore database
1/1/2002 01:01:01 | start checking devices ...
1/1/2002 01:01:01 | CANopen: AMICanMaster created
1/1/2002 01:01:03 | CANopen: AMICanMaster check Bus
1/1/2002 01:01:03 | CANopen: AMICanMaster reboot nodes
1/1/2002 01:01:07 | CANopen: AMICanMaster start nodes
1/1/2002 01:01:11 | CANopen: AMICanMaster Node Ready : index : 16 (16)
1/1/2002 01:01:11 | CANopen: AMICanMaster Node Ready : index : 61 (61)
1/1/2002 01:01:11 | CANopen: AMICanMaster Node Ready : index : 71 (71)
1/1/2002 01:01:11 | CANopen: started by AMI
1/1/2002 01:01:11 | found AMI
1/1/2002 01:01:11 | found: ID: 16 -CanPc- Vendor: BST-International Class Sub: AMI NetNo: 0
1/1/2002 01:01:12 | not found : -CanRegPc- 
1/1/2002 01:01:12 |      check the BaseNet setting of the CAN adapter; BaseNet has to be : 2
1/1/2002 01:01:12 | check CAN bus controller ...
1/1/2002 01:01:12 | CANopen bus controller ok : AMI
1/1/2002 01:01:12 | found: Id: 61 -Trav- Vendor: BST-International Class Sub: camboard
1/1/2002 01:01:13 | found: Id: 61 -Lens- Vendor: BST-International Class Sub: camboard
1/1/2002 01:01:13 | found: Id: 71 -Sync- Vendor: BST-International Class Sub: AMI (advanced machine interface)
1/1/2002 01:01:13 | found: Id: 61 -Flash- Vendor: BST-International GmbH Class Sub: camboard
1/1/2002 01:01:13 | Smart Register Interface : no bus interface found
1/1/2002 01:01:13 |      check the BaseNet setting of the CAN adapter; BaseNet has to be : 2
1/1/2002 01:01:15 | found: -GigE-LV- Vendor: Leutron Vision Class Sub: Ethernet port
1/1/2002 01:01:15 | found CamCFGFile : C:\Program Files\BST\SHS4000\ConfigPath\Cam1.cfg
1/1/2002 01:01:16 | found: Id: 129 -Cam- Vendor: LV Class Sub: GigE camera Type: PicSight_P203B-GigE  IP : 192.168.1.55
1/1/2002 01:01:16 | create: -FrameGrb- Vendor: BST Class Sub: virtual device
1/1/2002 01:01:16 | found: Id: 151 -RS232Pc- Vendor: BST-International Class Sub: RS232
1/1/2002 01:01:16 | found: Id: 161 -EPL- Vendor: BST-International Class Sub: External Position Link
1/1/2002 01:01:16 | starting devices ...
1/1/2002 01:01:16 | AMI / CAN-AMI
1/1/2002 01:01:16 | CANopen: AMICanMaster check Bus
1/1/2002 01:01:16 | CANopen: AMICanMaster reboot nodes
1/1/2002 01:01:20 | CANopen: AMICanMaster start nodes
1/1/2002 01:01:24 | CANopen: AMICanMaster Node Ready : index : 16 (16)
1/1/2002 01:01:25 | CANopen: AMICanMaster Node Ready : index : 61 (61)
1/1/2002 01:01:25 | CANopen: AMICanMaster Node Ready : index : 71 (71)
1/1/2002 01:01:25 | camboard / traverse
1/1/2002 01:01:59 | Trav : Homing successfully finished
1/1/2002 01:01:59 | Trav : set operation mode to positioning
1/1/2002 01:02:00 | camboard  SW: 3.1.3   		( HWId:1/1, DevID:65/0, Firmware:3.1.3  , BootLoader:0 )
1/1/2002 01:02:00 | Traverselength: 3939incr.
1/1/2002 01:02:00 | camboard / optical lens
1/1/2002 01:02:01 | Lens Reference   - Zoom : 558 / 45  - Iris : 607 / 266  - Focus : 455 / 160
1/1/2002 01:02:01 | VC 2000 IO/Sync-Board / machine syncronization
1/1/2002 01:02:02 | camboard / flash control unit
1/1/2002 01:02:02 | Ethernet port / LV-SDS
1/1/2002 01:02:02 | GigE camera / PicSight
1/1/2002 01:02:07 | virtual device / framegrabber
1/1/2002 01:02:07 | RS232 / IO port
1/1/2002 01:02:07 | External Position Link / IO Port
1/1/2002 01:02:07 | starting devices ok
1/1/2002 01:02:07 | devices ready to use
1/1/2002 01:02:07 | Web speed limit for analyses;  enable: 20m/min  disable: 10m/min
1/1/2002 01:02:07 | Number of connected cameras: 1
1/1/2002 01:02:07 | BC : Load Greyscale calibration
1/1/2002 01:02:07 | grey scale (R) fixed calibration data loaded, using cam #1, LV-P203GIGE
1/1/2002 01:02:07 | grey scale (G) fixed calibration data loaded, using cam #1, LV-P203GIGE
1/1/2002 01:02:07 | grey scale (B) fixed calibration data loaded, using cam #1, LV-P203GIGE
1/1/2002 01:02:07 | "White" greyscale calibration calculation successful
1/1/2002 01:02:07 | CM : Load Greyscale calibration
1/1/2002 01:02:07 | grey scale (R) fixed calibration data loaded, using cam #1, LV-P203GIGE
1/1/2002 01:02:07 | grey scale (G) fixed calibration data loaded, using cam #1, LV-P203GIGE
1/1/2002 01:02:07 | grey scale (B) fixed calibration data loaded, using cam #1, LV-P203GIGE
1/1/2002 01:02:07 | database-version: 3.18.1
1/1/2002 01:02:10 | Manual Mode
1/1/2002 01:02:10 | Manual Mode
1/1/2002 01:02:10 | switch to set: Production
1/1/2002 01:02:10 | create job: default
1/1/2002 01:02:10 | Manual Mode
1/1/2002 01:02:10 | switch to set: Production
1/1/2002 01:02:10 | load job: default
1/1/2002 01:02:11 | Sync Settings:	JobName:default
1/1/2002 01:02:11 | 			Index:1		Active:1	Modus:20	SyncType:1	Repeat:7200pls	ACS:0pls
1/1/2002 01:02:11 | 			Gear:1200.0pls	Per:400.0mm	(Inch:	Gear:0.0pls	Per:0.000Inch)
1/1/2002 01:02:11 | 			GearDivider:0	ResetDivider:1	ResetEdge:1
1/1/2002 01:02:11 | Job Settings:	JobName:default
1/1/2002 01:02:11 | 			DwellCount:2	DwellTime:500	FlipCam:0	Rotate:0	MirrorX:0	MirrorY:0	HR:0
1/1/2002 01:02:11 | 			Traverse#1	LimitLeft:0	LimitRight:4389
1/1/2002 01:02:11 | 			Traverse#2	LimitLeft:0	LimitRight:0
1/1/2002 01:02:11 | 			ScanAllPos:0	StartOfRep:	Cam#1:0pls	Cam#2:0pls	ACSScanMode:1
1/1/2002 01:02:12 | 			WebPath:1	WebDir:1	WebDir2:0
1/1/2002 01:02:12 | Videokernel ready now ...
1/1/2002 01:02:12 | reload system settings from database
1/1/2002 01:02:12 | Sync Settings:	JobName:default
1/1/2002 01:02:12 | 			Index:1		Active:1	Modus:20	SyncType:0	Repeat:7200pls	ACS:0pls
1/1/2002 01:02:12 | 			Gear:3600.0pls	Per:734.2mm	(Inch:	Gear:-1.0pls	Per:28.906Inch)
1/1/2002 01:02:12 | 			GearDivider:1	ResetDivider:1	ResetEdge:1
1/1/2002 01:02:12 | Job Settings:	JobName:default
1/1/2002 01:02:12 | 			DwellCount:2	DwellTime:500	FlipCam:0	Rotate:0	MirrorX:0	MirrorY:0	HR:0
1/1/2002 01:02:12 | 			Traverse#1	LimitLeft:0	LimitRight:4389
1/1/2002 01:02:12 | 			Traverse#2	LimitLeft:0	LimitRight:0
1/1/2002 01:02:12 | 			ScanAllPos:0	StartOfRep:	Cam#1:0pls	Cam#2:0pls	ACSScanMode:1
1/1/2002 01:02:12 | 			WebPath:1	WebDir:1	WebDir2:0
1/1/2002 01:02:12 | save system settings to database
1/1/2002 01:02:12 * Load job:  default ok
1/1/2002 01:02:12 * Job:   default
1/1/2002 01:02:12 * Position Set:  Production		Position:  ---	(man)
1/1/2002 01:02:19 | timeout freeze feedback
1/1/2002 01:02:19 | switch to set: Production
1/1/2002 01:02:19 * Language: CodePage : switch to Codepage: 1252; actual Codepage :1252 
1/1/2002 01:02:23 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
1/1/2002 01:02:23 | *** Web stopped ***
1/1/2002 01:02:23 | * Web is now too slow for analyses! *
1/1/2002 01:02:23 | Alarm acknowledge button pressed! Notifying modules (BC,CM,DD,LOC)
1/1/2002 01:02:23 | process position: -1 (restore)
1/1/2002 01:02:23 | save system settings to database
1/1/2002 01:02:23 * Rappeler un travail:  default ok
1/1/2002 01:02:23 * Travail:   default
1/1/2002 01:02:23 * Mode positions:  Production		Position:  ---	(man)
1/1/2002 01:02:23 | switch to set: Production
1/1/2002 01:02:24 | HWCheck : Controller CPU Temp 39C (Warning Level is 88C, Error Level is 95C), Board Temp 31C
1/1/2002 01:02:24 | HWCheck : Camera 1 Mainboard Temp 31C (Warning Level is 65C Error Level is 70C), Module Temp 29C
1/1/2002 01:02:29 | capture lock : timeout; / BPositionMgr6966
1/1/2002 01:02:34 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
1/1/2002 01:02:44 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
1/1/2002 01:02:55 | Capture failed : got no trigger; Camera 1 (GigE:Timeout) (2)
1/1/2002 01:03:05 | Capture failed : got no trigger; Camera 1 (GigE:Timeout) (3)
1/1/2002 01:03:15 | Capture failed : got no trigger; Camera 1 (GigE:Timeout) (4)
1/1/2002 01:03:26 | Capture failed : got no trigger; Camera 1 (GigE:Timeout) (5)
1/1/2002 01:03:36 | Capture failed : got no trigger; Camera 1 (GigE:Timeout) (6)
1/1/2002 01:03:47 | Capture failed : got no trigger; Camera 1 (GigE:Timeout) (7)
1/1/2002 01:03:57 | Capture failed : got no trigger; Camera 1 (GigE:Timeout) (8)
1/1/2002 01:04:07 | Capture failed : got no trigger; Camera 1 (GigE:Timeout) (9)
1/1/2002 01:04:18 | Capture failed : got no trigger; Camera 1 (GigE:Timeout) (10)
1/1/2002 01:04:28 | Capture failed : got no trigger; Camera 1 (GigE:Timeout) (11)
1/1/2002 01:04:39 | Capture failed : got no trigger; Camera 1 (GigE:Timeout) (12)
1/1/2002 01:04:49 | Capture failed : got no trigger; Camera 1 (GigE:Timeout) (13)
remove file : D:\SHS4000Log--05.txt
rename file : D:\SHS4000Log--04.txt to : D:\SHS4000Log--05.txt
rename file : D:\SHS4000Log--03.txt to : D:\SHS4000Log--04.txt
rename file : D:\SHS4000Log--02.txt to : D:\SHS4000Log--03.txt
rename file : D:\SHS4000Log--01.txt to : D:\SHS4000Log--02.txt
rename file : D:\SHS4000Log.txt to : D:\SHS4000Log--01.txt
