-----------------------------------------------------------------------------------------------------
------------------------------------- Videokernel startup -------------------------------------------
-----------------------------------------------------------------------------------------------------

5/31/2021 18:49:48 | server name: [SHS4100]
5/31/2021 18:49:48 | version: 7.1.2 (Sep 12 2018, 08:39:32)
5/31/2021 18:49:48 | initialize system startup   please wait ... 
5/31/2021 18:49:54 | HWCheck : open cgos lib: 1.3.15 / 1.2.19
5/31/2021 18:49:54 | HWCheck : open cgos board: IUKL
5/31/2021 18:49:55 | remote started
5/31/2021 18:49:55 | available job disk space for D:\JobPath: 2081 MB
5/31/2021 18:49:55 | available system disk space: 11881 MB
5/31/2021 18:49:55 | client link ID= 42893692, [SHS4100]
5/31/2021 18:49:55 | License : Virtual Repeat
5/31/2021 18:49:55 | total remote connects: 1
5/31/2021 18:49:55 | Booting video kernel ...
5/31/2021 18:49:55 | System ID: 00139535d6a4
5/31/2021 18:49:55 | start checking devices ...
5/31/2021 18:49:55 | CANopen: AMICanMaster created
5/31/2021 18:49:57 | CANopen: AMICanMaster check Bus
5/31/2021 18:49:57 | CANopen: AMICanMaster reboot nodes
5/31/2021 18:49:58 * ---------------------------------------------------------------------------------------------
5/31/2021 18:49:58 * ----------------------------------------- Status -----------------------------------------
5/31/2021 18:49:58 * Booting ...
5/31/2021 18:50:01 | CANopen: AMICanMaster start nodes
5/31/2021 18:50:05 | CANopen: AMICanMaster Node Ready : index : 16 (16)
5/31/2021 18:50:05 | CANopen: AMICanMaster Node Ready : index : 61 (61)
5/31/2021 18:50:05 | CANopen: AMICanMaster Node Ready : index : 71 (71)
5/31/2021 18:50:05 | CANopen: started by AMI
5/31/2021 18:50:05 | found AMI
5/31/2021 18:50:05 | found: ID: 16 -CanPc- Vendor: BST eltromat International Class Sub: AMI NetNo: 0
5/31/2021 18:50:05 | check CAN bus controller ...
5/31/2021 18:50:05 | CANopen bus controller ok : AMI
5/31/2021 18:50:05 | found: Id: 61 -Trav- Vendor: BST eltromat International Class Sub: camboard
5/31/2021 18:50:05 | found: Id: 61 -Lens- Vendor: BST eltromat International Class Sub: camboard
5/31/2021 18:50:05 | found: Id: 71 -Sync- Vendor: BST eltromat International Class Sub: AMI (advanced machine interface)
5/31/2021 18:50:06 | found: Id: 61 -Flash- Vendor: BST eltromat International Class Sub: camboard
5/31/2021 18:50:30 | found: - 0 device(s) on GigE-LV - 
5/31/2021 18:50:30 | open GigEVision library
5/31/2021 18:50:30 | open GigEVision system: Ver.: 1.2 System: Leutron Vision GenTL Interface
5/31/2021 18:50:34 | found: -GigEVision-LV- Vendor: Leutron Vision Class Sub: Ethernet port cameraIP : 192.168.1.55
5/31/2021 18:50:34 | found: - 1 device(s) on GigEVision-LV - 
5/31/2021 18:50:34 | found CamCFGFile : C:\Program Files\BST\SHS4000\ConfigPath\Cam1.cfg
5/31/2021 18:50:34 | found: Id: 129 -Cam- Vendor: LV Class Sub: GigEVision camera Type: mvBlueCOUGAR-X122C  IP : 192.168.1.55
5/31/2021 18:50:34 | create: -FrameGrb- Vendor: BST Class Sub: virtual device
5/31/2021 18:50:34 | found: Id: 151 -RS232Pc- Vendor: BST eltromat International Class Sub: RS232
5/31/2021 18:50:34 | found: Id: 161 -EPL- Vendor: BST eltromat International Class Sub: External Position Link
5/31/2021 18:50:34 | starting devices ...
5/31/2021 18:50:34 | AMI / CAN-AMI
5/31/2021 18:50:34 | CANopen: AMICanMaster check Bus
5/31/2021 18:50:35 | CANopen: AMICanMaster reboot nodes
5/31/2021 18:50:39 | CANopen: AMICanMaster start nodes
5/31/2021 18:50:43 | CANopen: AMICanMaster Node Ready : index : 16 (16)
5/31/2021 18:50:43 | CANopen: AMICanMaster Node Ready : index : 61 (61)
5/31/2021 18:50:43 | CANopen: AMICanMaster Node Ready : index : 71 (71)
5/31/2021 18:50:43 | camboard / traverse
5/31/2021 18:51:12 | Trav : Homing successfully finished
5/31/2021 18:51:12 | Trav : set operation mode to positioning
5/31/2021 18:51:13 | camboard  SW: 3.1.3   		( HWId:1/1, DevID:65/0, Firmware:3.1.3  , BootLoader:0 )
5/31/2021 18:51:13 | Traverselength: 3297incr.
5/31/2021 18:51:13 | camboard / optical lens
5/31/2021 18:51:14 | Lens Reference   - Zoom : 570 / 157  - Iris : 442 / 160  - Focus : 567 / 162
5/31/2021 18:51:14 | VC 2000 IO/Sync-Board / machine syncronization
5/31/2021 18:51:15 | camboard / flash control unit
5/31/2021 18:51:15 | Ethernet port / LV-SDS
5/31/2021 18:51:15 | GigEVision camera / mvBlueCOUGAR-X122C
5/31/2021 18:51:17 | start GigEVision camera : SW:1.6.123.0 IP:192.168.1.55
5/31/2021 18:51:18 | virtual device / framegrabber
5/31/2021 18:51:18 | RS232 / IO port
5/31/2021 18:51:18 | External Position Link / IO Port
5/31/2021 18:51:18 | starting devices ok
5/31/2021 18:51:18 | devices ready to use
5/31/2021 18:51:18 | Web speed limit for analyses;  enable: 20m/min  disable: 10m/min
5/31/2021 18:51:18 | Number of connected cameras: 1
5/31/2021 18:51:18 | BC : Load Greyscale calibration
5/31/2021 18:51:18 | grey scale (R) fixed calibration data loaded, using cam #1, LV-P203GIGE
5/31/2021 18:51:19 | grey scale (G) fixed calibration data loaded, using cam #1, LV-P203GIGE
5/31/2021 18:51:19 | grey scale (B) fixed calibration data loaded, using cam #1, LV-P203GIGE
5/31/2021 18:51:19 | "White" greyscale calibration calculation successful
5/31/2021 18:51:19 | CM : Load Greyscale calibration
5/31/2021 18:51:19 | grey scale (R) fixed calibration data loaded, using cam #1, LV-P203GIGE
5/31/2021 18:51:19 | grey scale (G) fixed calibration data loaded, using cam #1, LV-P203GIGE
5/31/2021 18:51:19 | grey scale (B) fixed calibration data loaded, using cam #1, LV-P203GIGE
5/31/2021 18:51:19 | database-version: 3.18.1
5/31/2021 18:51:22 | Manual Mode
5/31/2021 18:51:22 | Manual Mode
5/31/2021 18:51:22 | switch to set  Production
5/31/2021 18:51:22 | create job: default
5/31/2021 18:51:23 | Manual Mode
5/31/2021 18:51:23 | switch to set  Production
5/31/2021 18:51:23 | load set  Production
5/31/2021 18:51:23 | load job: default
5/31/2021 18:51:24 | Sync Settings:	JobName:default
5/31/2021 18:51:24 | 			Index:1		Active:1	Modus:16	SyncType:1	Repeat:20001pls	ACS:20000pls
5/31/2021 18:51:24 | 			Gear:1200.0pls	Per:400.0mm	(Inch:	Gear:0.0pls	Per:0.000Inch)
5/31/2021 18:51:24 | 			GearDivider:0	ResetDivider:1	ResetEdge:1
5/31/2021 18:51:24 | Job Settings:	JobName:default
5/31/2021 18:51:24 | 			DwellCount:1	DwellTime:400	FlipCam:0	Rotate:0	MirrorX:0	MirrorY:0	HR:0
5/31/2021 18:51:24 | 			Traverse#1	LimitLeft:557	LimitRight:2775
5/31/2021 18:51:24 | 			Traverse#2	LimitLeft:0	LimitRight:0
5/31/2021 18:51:24 | 			ScanAllPos:0	StartOfRep:	Cam#1:172pls	Cam#2:172pls	ACSScanMode:0
5/31/2021 18:51:24 | 			WebPath:1	WebDir:0	WebDir2:0
5/31/2021 18:51:24 | Videokernel ready now ...
5/31/2021 18:51:24 | reload system settings from database
5/31/2021 18:51:24 | Sync Settings:	JobName:default
5/31/2021 18:51:24 | 			Index:1		Active:1	Modus:16	SyncType:0	Repeat:20001pls	ACS:20000pls
5/31/2021 18:51:24 | 			Gear:10000.0pls	Per:788.0mm	(Inch:	Gear:-1.0pls	Per:31.024Inch)
5/31/2021 18:51:24 | 			GearDivider:1	ResetDivider:1	ResetEdge:1
5/31/2021 18:51:24 | Job Settings:	JobName:default
5/31/2021 18:51:24 | 			DwellCount:1	DwellTime:400	FlipCam:0	Rotate:0	MirrorX:0	MirrorY:0	HR:0
5/31/2021 18:51:24 | 			Traverse#1	LimitLeft:557	LimitRight:2775
5/31/2021 18:51:24 | 			Traverse#2	LimitLeft:0	LimitRight:0
5/31/2021 18:51:24 | 			ScanAllPos:0	StartOfRep:	Cam#1:172pls	Cam#2:172pls	ACSScanMode:0
5/31/2021 18:51:24 | 			WebPath:1	WebDir:0	WebDir2:0
5/31/2021 18:51:24 | save system settings to database
5/31/2021 18:51:24 * Load job:  default ok
5/31/2021 18:51:24 * Job:   default
5/31/2021 18:51:24 * Position Set:  Production		Position:  ---	(man)
5/31/2021 18:51:27 | process position: -1 (restore)
5/31/2021 18:51:27 | switch to set  Production
5/31/2021 18:51:27 * CBSTControlPanelView::OnUpdateViewLanguage sys:0x409 DB:0x40c
5/31/2021 18:51:27 * Language: CodePage : switch to Codepage: 1252; actual Codepage :1252 
5/31/2021 18:51:29 | save system settings to database
5/31/2021 18:51:29 * Rappeler un travail:  default ok
5/31/2021 18:51:29 * Travail:   default
5/31/2021 18:51:29 * Mode positions:  Production		Position:  ---	(man)
5/31/2021 18:51:29 | switch to set  Production
5/31/2021 18:51:29 | HWCheck : Controller CPU Temp 58C (Warning Level is 88C, Error Level is 93C), Board Temp 44C
5/31/2021 18:51:29 | HWCheck : Camera 1 Mainboard Temp 49C (Warning Level is 65C Error Level is 70C), Module Temp 44C
5/31/2021 18:52:52 | Manual Mode
5/31/2021 18:52:55 | reload system settings from database
5/31/2021 18:53:42 | SetTop() add Offset: 8402 new Offset8574
5/31/2021 18:54:05 | Manual Mode
5/31/2021 18:54:09 | Manual Mode
5/31/2021 18:54:17 | Manual Mode (2)
5/31/2021 18:54:19 | reload system settings from database
5/31/2021 18:55:06 | SetTop() add Offset: 1116 new Offset9690
5/31/2021 18:55:27 | Manual Mode
5/31/2021 18:55:37 | Manual Mode
5/31/2021 18:55:39 | reload system settings from database
5/31/2021 18:55:42 | Manual Mode
5/31/2021 18:55:48 | Manual Mode
5/31/2021 18:55:48 | Manual Mode (2)
5/31/2021 18:55:48 | Manual Mode (3)
5/31/2021 18:55:48 | Manual Mode (4)
5/31/2021 18:55:48 | switch to set  AutoScan
5/31/2021 18:55:48 | Making autoscan wo BC. Previous special mode = 0
5/31/2021 18:55:48 | switch to set  AutoScan
5/31/2021 18:55:51 | Auto Mode
5/31/2021 18:55:51 | Repeat length: 20000 pls
5/31/2021 18:55:55 * Mode positions:  AutoScan		Position:   0	(auto)
5/31/2021 18:55:57 * Mode positions:  AutoScan		Position:   7	(auto)
5/31/2021 18:55:58 * Mode positions:  AutoScan		Position:   14	(auto)
5/31/2021 18:56:00 * Mode positions:  AutoScan		Position:   21	(auto)
5/31/2021 18:56:01 * Mode positions:  AutoScan		Position:   28	(auto)
5/31/2021 18:56:02 * Mode positions:  AutoScan		Position:   35	(auto)
5/31/2021 18:56:03 * Mode positions:  AutoScan		Position:   42	(auto)
5/31/2021 18:56:03 * Mode positions:  AutoScan		Position:   49	(auto)
5/31/2021 18:56:06 * Mode positions:  AutoScan		Position:   1	(auto)
5/31/2021 18:56:07 * Mode positions:  AutoScan		Position:   8	(auto)
5/31/2021 18:56:09 * Mode positions:  AutoScan		Position:   15	(auto)
5/31/2021 18:56:10 * Mode positions:  AutoScan		Position:   22	(auto)
5/31/2021 18:56:12 * Mode positions:  AutoScan		Position:   29	(auto)
5/31/2021 18:56:13 * Mode positions:  AutoScan		Position:   36	(auto)
5/31/2021 18:56:14 * Mode positions:  AutoScan		Position:   43	(auto)
5/31/2021 18:56:15 * Mode positions:  AutoScan		Position:   50	(auto)
5/31/2021 18:56:18 * Mode positions:  AutoScan		Position:   2	(auto)
5/31/2021 18:56:19 * Mode positions:  AutoScan		Position:   9	(auto)
5/31/2021 18:56:20 * Mode positions:  AutoScan		Position:   16	(auto)
5/31/2021 18:56:20 * Mode positions:  AutoScan		Position:   23	(auto)
5/31/2021 18:56:22 * Mode positions:  AutoScan		Position:   30	(auto)
5/31/2021 18:56:23 * Mode positions:  AutoScan		Position:   37	(auto)
5/31/2021 18:56:25 * Mode positions:  AutoScan		Position:   44	(auto)
5/31/2021 18:56:25 * Mode positions:  AutoScan		Position:   51	(auto)
5/31/2021 18:56:28 * Mode positions:  AutoScan		Position:   3	(auto)
5/31/2021 18:56:28 * Mode positions:  AutoScan		Position:   10	(auto)
5/31/2021 18:56:30 * Mode positions:  AutoScan		Position:   17	(auto)
5/31/2021 18:56:31 * Mode positions:  AutoScan		Position:   24	(auto)
5/31/2021 18:56:31 * Mode positions:  AutoScan		Position:   31	(auto)
5/31/2021 18:56:33 * Mode positions:  AutoScan		Position:   38	(auto)
5/31/2021 18:56:34 * Mode positions:  AutoScan		Position:   45	(auto)
5/31/2021 18:56:35 * Mode positions:  AutoScan		Position:   52	(auto)
5/31/2021 18:56:37 * Mode positions:  AutoScan		Position:   4	(auto)
5/31/2021 18:56:39 * Mode positions:  AutoScan		Position:   11	(auto)
5/31/2021 18:56:39 * Mode positions:  AutoScan		Position:   18	(auto)
5/31/2021 18:56:41 * Mode positions:  AutoScan		Position:   25	(auto)
5/31/2021 18:56:42 * Mode positions:  AutoScan		Position:   32	(auto)
5/31/2021 18:56:44 * Mode positions:  AutoScan		Position:   39	(auto)
5/31/2021 18:56:45 * Mode positions:  AutoScan		Position:   46	(auto)
5/31/2021 18:56:47 * Mode positions:  AutoScan		Position:   53	(auto)
5/31/2021 18:56:49 * Mode positions:  AutoScan		Position:   5	(auto)
5/31/2021 18:56:50 * Mode positions:  AutoScan		Position:   12	(auto)
5/31/2021 18:56:50 * Mode positions:  AutoScan		Position:   19	(auto)
5/31/2021 18:56:52 * Mode positions:  AutoScan		Position:   26	(auto)
5/31/2021 18:56:53 * Mode positions:  AutoScan		Position:   33	(auto)
5/31/2021 18:56:55 * Mode positions:  AutoScan		Position:   40	(auto)
5/31/2021 18:56:56 * Mode positions:  AutoScan		Position:   47	(auto)
5/31/2021 18:56:57 * Mode positions:  AutoScan		Position:   54	(auto)
5/31/2021 18:56:59 * Mode positions:  AutoScan		Position:   6	(auto)
5/31/2021 18:57:00 * Mode positions:  AutoScan		Position:   13	(auto)
5/31/2021 18:57:01 * Mode positions:  AutoScan		Position:   20	(auto)
5/31/2021 18:57:03 * Mode positions:  AutoScan		Position:   27	(auto)
5/31/2021 18:57:04 * Mode positions:  AutoScan		Position:   34	(auto)
5/31/2021 18:57:05 * Mode positions:  AutoScan		Position:   41	(auto)
5/31/2021 18:57:07 * Mode positions:  AutoScan		Position:   48	(auto)
5/31/2021 18:57:08 * Mode positions:  AutoScan		Position:   55	(auto)
5/31/2021 18:57:12 * Mode positions:  AutoScan		Position:   0	(auto)
5/31/2021 18:57:14 * Mode positions:  AutoScan		Position:   1	(auto)
5/31/2021 18:57:17 * Mode positions:  AutoScan		Position:   2	(auto)
5/31/2021 18:57:19 * Mode positions:  AutoScan		Position:   3	(auto)
5/31/2021 18:57:21 * Mode positions:  AutoScan		Position:   4	(auto)
5/31/2021 18:57:24 * Mode positions:  AutoScan		Position:   5	(auto)
5/31/2021 18:57:26 * Mode positions:  AutoScan		Position:   6	(auto)
5/31/2021 18:57:27 | Manual Mode
5/31/2021 18:57:29 | save system settings to database
5/31/2021 18:57:30 * Mode positions:  AutoScan		Position:   7	(man)
5/31/2021 18:57:30 * CBSTControlPanelView::OnUpdateViewLanguage sys:0x40c DB:0x40c
5/31/2021 18:57:30 * Language: CodePage : switch to Codepage: 1252; actual Codepage :1252 
5/31/2021 18:58:32 | save system settings to database
5/31/2021 18:58:34 | save system settings to database (2)
5/31/2021 18:58:34 * CBSTControlPanelView::OnUpdateViewLanguage sys:0x40c DB:0x40c
5/31/2021 18:58:34 * Language: CodePage : switch to Codepage: 1252; actual Codepage :1252 
