-----------------------------------------------------------------------------------------------------
------------------------------------- Videokernel startup -------------------------------------------
-----------------------------------------------------------------------------------------------------

3/19/2021 08:13:05 | server name: [SHS4100]
3/19/2021 08:13:05 | version: 7.1.2 (Sep 12 2018, 08:39:32)
3/19/2021 08:13:05 | initialize system startup   please wait ... 
3/19/2021 08:13:10 | HWCheck : open cgos lib: 1.3.15 / 1.2.19
3/19/2021 08:13:10 | HWCheck : open cgos board: IUKL
3/19/2021 08:13:11 | remote started
3/19/2021 08:13:11 | available job disk space for D:\JobPath: 2087 MB
3/19/2021 08:13:11 | available system disk space: 11880 MB
3/19/2021 08:13:11 | client link ID= 41255652, [SHS4100]
3/19/2021 08:13:11 | License : Virtual Repeat
3/19/2021 08:13:11 | total remote connects: 1
3/19/2021 08:13:11 | Booting video kernel ...
3/19/2021 08:13:12 | System ID: 00139534c6c3
3/19/2021 08:13:12 | start checking devices ...
3/19/2021 08:13:12 | CANopen: AMICanMaster created
3/19/2021 08:13:18 * ---------------------------------------------------------------------------------------------
3/19/2021 08:13:18 * ----------------------------------------- Status -----------------------------------------
3/19/2021 08:13:18 * Booting ...
3/19/2021 08:13:19 | CANopen: AMICanMaster check Bus
3/19/2021 08:13:19 | CANopen: AMICanMaster reboot nodes
3/19/2021 08:13:23 | CANopen: AMICanMaster start nodes
3/19/2021 08:13:27 | CANopen: AMICanMaster Node Ready : index : 16 (16)
3/19/2021 08:13:27 | CANopen: AMICanMaster Node Ready : index : 61 (61)
3/19/2021 08:13:27 | CANopen: AMICanMaster Node Ready : index : 71 (71)
3/19/2021 08:13:27 | CANopen: started by AMI
3/19/2021 08:13:27 | found AMI
3/19/2021 08:13:27 | found: ID: 16 -CanPc- Vendor: BST eltromat International Class Sub: AMI NetNo: 0
3/19/2021 08:13:27 | check CAN bus controller ...
3/19/2021 08:13:27 | CANopen bus controller ok : AMI
3/19/2021 08:13:27 | found: Id: 61 -Trav- Vendor: BST eltromat International Class Sub: camboard
3/19/2021 08:13:27 | found: Id: 61 -Lens- Vendor: BST eltromat International Class Sub: camboard
3/19/2021 08:13:27 | found: Id: 71 -Sync- Vendor: BST eltromat International Class Sub: AMI (advanced machine interface)
3/19/2021 08:13:27 | found: Id: 61 -Flash- Vendor: BST eltromat International Class Sub: camboard
3/19/2021 08:13:52 | found: - 0 device(s) on GigE-LV - 
3/19/2021 08:13:52 | open GigEVision library
3/19/2021 08:13:54 | open GigEVision system: Ver.: 1.2 System: Leutron Vision GenTL Interface
3/19/2021 08:13:58 | found: -GigEVision-LV- Vendor: Leutron Vision Class Sub: Ethernet port cameraIP : 192.168.1.55
3/19/2021 08:13:58 | found: - 1 device(s) on GigEVision-LV - 
3/19/2021 08:13:58 | found CamCFGFile : C:\Program Files\BST\SHS4000\ConfigPath\Cam1.cfg
3/19/2021 08:13:58 | found: Id: 129 -Cam- Vendor: LV Class Sub: GigEVision camera Type: mvBlueCOUGAR-X122C  IP : 192.168.1.55
3/19/2021 08:13:58 | create: -FrameGrb- Vendor: BST Class Sub: virtual device
3/19/2021 08:13:58 | found: Id: 151 -RS232Pc- Vendor: BST eltromat International Class Sub: RS232
3/19/2021 08:13:58 | found: Id: 161 -EPL- Vendor: BST eltromat International Class Sub: External Position Link
3/19/2021 08:13:58 | starting devices ...
3/19/2021 08:13:58 | AMI / CAN-AMI
3/19/2021 08:13:58 | CANopen: AMICanMaster check Bus
3/19/2021 08:13:58 | CANopen: AMICanMaster reboot nodes
3/19/2021 08:14:02 | CANopen: AMICanMaster start nodes
3/19/2021 08:14:06 | CANopen: AMICanMaster Node Ready : index : 16 (16)
3/19/2021 08:14:06 | CANopen: AMICanMaster Node Ready : index : 61 (61)
3/19/2021 08:14:06 | CANopen: AMICanMaster Node Ready : index : 71 (71)
3/19/2021 08:14:07 | camboard / traverse
3/19/2021 08:14:51 | Trav : Homing successfully finished
3/19/2021 08:14:51 | Trav : set operation mode to positioning
3/19/2021 08:14:52 | camboard  SW: 3.1.3   		( HWId:1/1, DevID:65/0, Firmware:3.1.3  , BootLoader:0 )
3/19/2021 08:14:52 | Traverselength: 5168incr.
3/19/2021 08:14:52 | camboard / optical lens
3/19/2021 08:14:53 | Lens Reference   - Zoom : 562 / 46  - Iris : 603 / 258  - Focus : 461 / 159
3/19/2021 08:14:53 | VC 2000 IO/Sync-Board / machine syncronization
3/19/2021 08:14:54 | camboard / flash control unit
3/19/2021 08:14:54 | Ethernet port / LV-SDS
3/19/2021 08:14:54 | GigEVision camera / mvBlueCOUGAR-X122C
3/19/2021 08:14:57 | start GigEVision camera : SW:1.6.123.0 IP:192.168.1.55
3/19/2021 08:14:57 | virtual device / framegrabber
3/19/2021 08:14:57 | RS232 / IO port
3/19/2021 08:14:57 | External Position Link / IO Port
3/19/2021 08:14:58 | starting devices ok
3/19/2021 08:14:58 | devices ready to use
3/19/2021 08:14:58 | Web speed limit for analyses;  enable: 20m/min  disable: 10m/min
3/19/2021 08:14:58 | Number of connected cameras: 1
3/19/2021 08:14:58 | BC : Load Greyscale calibration
3/19/2021 08:14:58 | grey scale (R) fixed calibration data loaded, using cam #1, LV-P203GIGE
3/19/2021 08:14:58 | grey scale (G) fixed calibration data loaded, using cam #1, LV-P203GIGE
3/19/2021 08:14:58 | grey scale (B) fixed calibration data loaded, using cam #1, LV-P203GIGE
3/19/2021 08:14:58 | "White" greyscale calibration calculation successful
3/19/2021 08:14:58 | CM : Load Greyscale calibration
3/19/2021 08:14:58 | grey scale (R) fixed calibration data loaded, using cam #1, LV-P203GIGE
3/19/2021 08:14:58 | grey scale (G) fixed calibration data loaded, using cam #1, LV-P203GIGE
3/19/2021 08:14:58 | grey scale (B) fixed calibration data loaded, using cam #1, LV-P203GIGE
3/19/2021 08:14:58 | database-version: 3.18.1
3/19/2021 08:15:00 | Manual Mode
3/19/2021 08:15:00 | switch to set  Production
3/19/2021 08:15:00 | create job: Default
3/19/2021 08:15:00 | Manual Mode
3/19/2021 08:15:00 | switch to set  Production
3/19/2021 08:15:00 | Videokernel ready now ...
3/19/2021 08:15:00 | reload system settings from database
3/19/2021 08:15:00 | Sync Settings:	JobName:Default
3/19/2021 08:15:00 | 			Index:1		Active:1	Modus:0	SyncType:1	Repeat:0pls	ACS:0pls
3/19/2021 08:15:00 | 			Gear:1200.0pls	Per:400.0mm	(Inch:	Gear:0.0pls	Per:0.000Inch)
3/19/2021 08:15:00 | 			GearDivider:1	ResetDivider:1	ResetEdge:1
3/19/2021 08:15:00 | Job Settings:	JobName:Default
3/19/2021 08:15:00 | 			DwellCount:1	DwellTime:400	FlipCam:0	Rotate:0	MirrorX:0	MirrorY:0	HR:1
3/19/2021 08:15:00 | 			Traverse#1	LimitLeft:0	LimitRight:0
3/19/2021 08:15:00 | 			Traverse#2	LimitLeft:0	LimitRight:0
3/19/2021 08:15:00 | 			ScanAllPos:0	StartOfRep:	Cam#1:0pls	Cam#2:0pls	ACSScanMode:0
3/19/2021 08:15:00 | 			WebPath:1	WebDir:0	WebDir2:0
3/19/2021 08:15:00 * CBSTControlPanelView::OnUpdateViewLanguage sys:0x409 DB:0x40c
3/19/2021 08:15:00 * Language: CodePage : switch to Codepage: 1252; actual Codepage :1252 
3/19/2021 08:15:01 | save system settings to database
3/19/2021 08:15:01 * Rappeler un travail:  Default ok
3/19/2021 08:15:01 * Travail:   Default
3/19/2021 08:15:01 * Mode positions:  Production		Position:  ---	(man)
3/19/2021 08:15:01 | switch to set  Production
3/19/2021 08:15:01 | HWCheck : Controller CPU Temp 50C (Warning Level is 88C, Error Level is 93C), Board Temp 35C
3/19/2021 08:15:01 | HWCheck : Camera 1 Mainboard Temp 39C (Warning Level is 65C Error Level is 70C), Module Temp 35C
3/19/2021 08:15:14 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
3/19/2021 08:15:14 | *** Web stopped ***
3/19/2021 08:15:14 | * Web is now too slow for analyses! *
3/19/2021 08:15:14 | Alarm acknowledge button pressed! Notifying modules (BC,CM,DD,LOC)
3/19/2021 08:15:14 | process position: -1 (restore)
3/19/2021 08:15:24 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
3/19/2021 08:15:35 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
3/19/2021 08:15:38 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:15:38 | *** Web started moving ***
3/19/2021 08:15:38 | * Web is now fast enough for analyses! *
3/19/2021 08:15:56 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:16:21 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
3/19/2021 08:16:24 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:16:43 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:17:08 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
3/19/2021 08:17:11 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:17:29 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:17:54 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
3/19/2021 08:17:57 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:18:15 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:18:40 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
3/19/2021 08:18:43 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:19:02 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-858993460)
3/19/2021 08:19:27 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
3/19/2021 08:19:30 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:19:48 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:20:13 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
3/19/2021 08:20:16 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:20:34 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:20:59 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
3/19/2021 08:21:02 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:21:21 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:21:46 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
3/19/2021 08:21:49 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:22:07 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-858993460)
3/19/2021 08:22:32 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
3/19/2021 08:22:35 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:22:53 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:23:19 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
3/19/2021 08:23:22 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:23:40 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:24:05 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
3/19/2021 08:24:08 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:24:26 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:24:51 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
3/19/2021 08:24:54 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:25:12 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:25:33 | Manual Mode
3/19/2021 08:25:38 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
3/19/2021 08:25:43 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:25:43 | save system settings to database
3/19/2021 08:25:52 * CBSTControlPanelView::OnUpdateViewLanguage sys:0x40c DB:0x40c
3/19/2021 08:25:52 * Language: CodePage : switch to Codepage: 1252; actual Codepage :1252 
3/19/2021 08:25:52 | save system settings to database
3/19/2021 08:26:06 | save system settings to database (2)
3/19/2021 08:26:21 * CBSTControlPanelView::OnUpdateViewLanguage sys:0x40c DB:0x40c
3/19/2021 08:26:21 * Language: CodePage : switch to Codepage: 1252; actual Codepage :1252 
3/19/2021 08:26:27 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:26:52 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
3/19/2021 08:26:55 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-1)
3/19/2021 08:27:16 | BPositionCtrl::OnWakeUp(): Current WebSpeed unavailable! (-858993460)
remove file : D:\SHS4100Log--05.txt
rename file : D:\SHS4100Log--04.txt to : D:\SHS4100Log--05.txt
rename file : D:\SHS4100Log--03.txt to : D:\SHS4100Log--04.txt
rename file : D:\SHS4100Log--02.txt to : D:\SHS4100Log--03.txt
rename file : D:\SHS4100Log--01.txt to : D:\SHS4100Log--02.txt
rename file : D:\SHS4100Log.txt to : D:\SHS4100Log--01.txt
