-----------------------------------------------------------------------------------------------------
------------------------------------- Videokernel startup -------------------------------------------
-----------------------------------------------------------------------------------------------------

1/1/2002 01:00:45 | server name: [SHS4000]
1/1/2002 01:00:45 | version: 6.1.3 (Jul 10 2015, 15:22:27)
1/1/2002 01:00:45 | initialize system startup   please wait ... 
1/1/2002 01:00:50 | HWCheck : Controller open Itlcd o.k.
1/1/2002 01:00:51 | remote started
1/1/2002 01:00:51 | available job disk space for D:\JobPath: 331 MB
1/1/2002 01:00:51 | available system disk space: 132 MB
1/1/2002 01:00:51 | client link ID= 16793636, [SHS4000]
1/1/2002 01:00:51 | License : Virtual Repeat
1/1/2002 01:00:51 | total remote connects: 1
1/1/2002 01:00:51 | Booting video kernel ...
1/1/2002 01:00:51 | system ident: 00e0f430b998
1/1/2002 01:00:51 | start checking devices ...
1/1/2002 01:00:51 | CANopen: AMICanMaster created
1/1/2002 01:00:54 | CANopen: AMICanMaster check Bus
1/1/2002 01:00:54 | CANopen: AMICanMaster reboot nodes
1/1/2002 01:00:58 | CANopen: AMICanMaster start nodes
1/1/2002 01:00:59 * ---------------------------------------------------------------------------------------------
1/1/2002 01:00:59 * ----------------------------------------- Status -----------------------------------------
1/1/2002 01:00:59 * Booting ...
1/1/2002 01:01:02 | CANopen: AMICanMaster Node Ready : index : 16 (16)
1/1/2002 01:01:02 | CANopen: AMICanMaster Node Ready : index : 61 (61)
1/1/2002 01:01:02 | CANopen: AMICanMaster Node Ready : index : 71 (71)
1/1/2002 01:01:02 | CANopen: started by AMI
1/1/2002 01:01:02 | found AMI
1/1/2002 01:01:02 | found: ID: 16 -CanPc- Vendor: BST eltromat International Class Sub: AMI NetNo: 0
1/1/2002 01:01:02 | check CAN bus controller ...
1/1/2002 01:01:02 | CANopen bus controller ok : AMI
1/1/2002 01:01:02 | found: Id: 61 -Trav- Vendor: BST eltromat International Class Sub: camboard
1/1/2002 01:01:02 | found: Id: 61 -Lens- Vendor: BST eltromat International Class Sub: camboard
1/1/2002 01:01:02 | found: Id: 71 -Sync- Vendor: BST eltromat International Class Sub: AMI (advanced machine interface)
1/1/2002 01:01:02 | found: Id: 61 -Flash- Vendor: BST eltromat International Class Sub: camboard
1/1/2002 01:01:26 | found: - 0 device(s) on GigE-LV - 
1/1/2002 01:01:27 | open GigEVision system: Ver.: 1.2 System: Leutron Vision GenTL Interface
1/1/2002 01:01:29 | not found: GigEVision device
1/1/2002 01:01:29 | close GigEVision system
1/1/2002 01:01:29 | close GigEVision library
1/1/2002 01:01:29 | found: - 0 device(s) on GigEVision-LV - 
1/1/2002 01:01:29 | not found: GigE camera device
1/1/2002 01:01:29 | create: -FrameGrb- Vendor: BST Class Sub: virtual device
1/1/2002 01:01:29 | found: Id: 151 -RS232Pc- Vendor: BST eltromat International Class Sub: RS232
1/1/2002 01:01:29 | found: Id: 161 -EPL- Vendor: BST eltromat International Class Sub: External Position Link
1/1/2002 01:01:29 | starting devices ...
1/1/2002 01:01:29 | AMI / CAN-AMI
1/1/2002 01:01:29 | CANopen: AMICanMaster check Bus
1/1/2002 01:01:29 | CANopen: AMICanMaster reboot nodes
1/1/2002 01:01:33 | CANopen: AMICanMaster start nodes
1/1/2002 01:01:37 | CANopen: AMICanMaster Node Ready : index : 16 (16)
1/1/2002 01:01:37 | CANopen: AMICanMaster Node Ready : index : 61 (61)
1/1/2002 01:01:37 | CANopen: AMICanMaster Node Ready : index : 71 (71)
1/1/2002 01:01:38 | camboard / traverse
1/1/2002 01:01:52 | Trav : Homing successfully finished
1/1/2002 01:01:52 | Trav : set operation mode to positioning
1/1/2002 01:01:53 | camboard  SW: 3.1.3   		( HWId:1/1, DevID:65/0, Firmware:3.1.3  , BootLoader:0 )
1/1/2002 01:01:53 | Traverselength: 1724incr.
1/1/2002 01:01:53 | camboard / optical lens
1/1/2002 01:01:54 | Lens Reference   - Zoom : 585 / 159  - Iris : 486 / 146  - Focus : 554 / 160
1/1/2002 01:01:54 | VC 2000 IO/Sync-Board / machine syncronization
1/1/2002 01:01:55 | camboard / flash control unit
1/1/2002 01:01:55 | virtual device / framegrabber
1/1/2002 01:01:55 | RS232 / IO port
1/1/2002 01:01:55 | External Position Link / IO Port
1/1/2002 01:01:55 | starting devices ok
1/1/2002 01:01:55 | devices ready to use
1/1/2002 01:01:55 | Web speed limit for analyses;  enable: 20m/min  disable: 10m/min
1/1/2002 01:01:55 | Number of connected cameras: 0
1/1/2002 01:01:55 | BC : Load Greyscale calibration
1/1/2002 01:01:55 | CM : Load Greyscale calibration
1/1/2002 01:01:55 | database-version: 3.18.1
1/1/2002 01:01:57 | Manual Mode
1/1/2002 01:01:57 | Manual Mode
1/1/2002 01:01:57 | switch to set: Production
1/1/2002 01:01:57 | create job: default
1/1/2002 01:01:57 | Manual Mode
1/1/2002 01:01:57 | switch to set: Production
1/1/2002 01:01:57 | load job: default
1/1/2002 01:01:58 | Sync Settings:	JobName:default
1/1/2002 01:01:58 | 			Index:1		Active:1	Modus:16	SyncType:1	Repeat:360pls	ACS:0pls
1/1/2002 01:01:58 | 			Gear:1200.0pls	Per:400.0mm	(Inch:	Gear:0.0pls	Per:0.000Inch)
1/1/2002 01:01:58 | 			GearDivider:0	ResetDivider:1	ResetEdge:1
1/1/2002 01:01:59 | Job Settings:	JobName:default
1/1/2002 01:01:59 | 			DwellCount:1	DwellTime:400	FlipCam:0	Rotate:0	MirrorX:0	MirrorY:0	HR:0
1/1/2002 01:01:59 | 			Traverse#1	LimitLeft:0	LimitRight:1296
1/1/2002 01:01:59 | 			ScanAllPos:0	StartOfRep:	Cam#1:0pls	Cam#2:0pls	ACSScanMode:1
1/1/2002 01:01:59 | 			WebPath:1	WebDir:0	WebDir2:0
1/1/2002 01:01:59 | Videokernel ready now ...
1/1/2002 01:01:59 | reload system settings from database
1/1/2002 01:01:59 | Sync Settings:	JobName:default
1/1/2002 01:01:59 | 			Index:1		Active:1	Modus:16	SyncType:0	Repeat:360pls	ACS:0pls
1/1/2002 01:01:59 | 			Gear:180.0pls	Per:315.0mm	(Inch:	Gear:-1.0pls	Per:12.402Inch)
1/1/2002 01:01:59 | 			GearDivider:1	ResetDivider:1	ResetEdge:1
1/1/2002 01:01:59 | Job Settings:	JobName:default
1/1/2002 01:01:59 | 			DwellCount:1	DwellTime:400	FlipCam:0	Rotate:0	MirrorX:0	MirrorY:0	HR:0
1/1/2002 01:01:59 | 			Traverse#1	LimitLeft:0	LimitRight:1296
1/1/2002 01:01:59 | 			ScanAllPos:0	StartOfRep:	Cam#1:0pls	Cam#2:0pls	ACSScanMode:1
1/1/2002 01:01:59 | 			WebPath:1	WebDir:0	WebDir2:0
1/1/2002 01:02:00 | save system settings to database
1/1/2002 01:02:00 * Load job:  default ok
1/1/2002 01:02:00 * Job:   default
1/1/2002 01:02:00 * Position Set:  Production		Position:  ---	(man)
1/1/2002 01:02:04 | timeout thread 1 level, cause: Traverse 1
1/1/2002 01:02:05 | *** Web stopped ***
1/1/2002 01:02:05 | * Web is now too slow for analyses! *
1/1/2002 01:02:05 | Alarm acknowledge button pressed! Notifying modules (BC,CM,DD,LOC)
1/1/2002 01:02:05 | process position: -1 (restore)
1/1/2002 01:02:05 | switch to set: Production
1/1/2002 01:02:05 * Language: CodePage : switch to Codepage: 1252; actual Codepage :1252 
1/1/2002 01:02:06 | save system settings to database
1/1/2002 01:02:06 * Rappeler un travail:  default ok
1/1/2002 01:02:06 * Travail:   default
1/1/2002 01:02:06 * Mode positions:  Production		Position:  ---	(man)
1/1/2002 01:02:06 | switch to set: Production
1/1/2002 01:02:07 | HWCheck : Controller CPU Temp 44C (Warning Level is 88C, Error Level is 95C), Board Temp 37C
1/1/2002 01:02:07 | Event queue overflow, reset queue and events lost
1/1/2002 01:02:07 | Event trouble ID: 18, Data: 0, Object: 0, Item: 0 String: 
1/1/2002 01:02:13 | Manual Mode
1/1/2002 01:02:17 | client unlink ID= 0, [SHS4000]
1/1/2002 01:02:17 | total remote connects: 0
1/1/2002 01:02:17 | Manual Mode
1/1/2002 01:02:23 | close External Position Link / IO Port
1/1/2002 01:02:24 | close RS232 / IO port
1/1/2002 01:02:24 | close virtual device / framegrabber
1/1/2002 01:02:24 | close camboard / flash control unit
1/1/2002 01:02:24 | close VC 2000 IO/Sync-Board / machine syncronization
1/1/2002 01:02:24 | close camboard / optical lens
1/1/2002 01:02:24 | close camboard / traverse
1/1/2002 01:02:27 | close AMI / CAN-AMI
1/1/2002 01:02:29 | Closing video kernel ...
1/1/2002 01:02:30 | memorized last check object
1/1/2002 01:02:30 | all check objects deleted
1/1/2002 01:02:31 | Video kernel closed now ...
1/1/2002 01:02:32 | Video kernel closed now ...
remove file : D:\SHS4000Log--05.txt
rename file : D:\SHS4000Log--04.txt to : D:\SHS4000Log--05.txt
rename file : D:\SHS4000Log--03.txt to : D:\SHS4000Log--04.txt
rename file : D:\SHS4000Log--02.txt to : D:\SHS4000Log--03.txt
rename file : D:\SHS4000Log--01.txt to : D:\SHS4000Log--02.txt
rename file : D:\SHS4000Log.txt to : D:\SHS4000Log--01.txt
