-----------------------------------------------------------------------------------------------------
------------------------------------- Videokernel startup -------------------------------------------
-----------------------------------------------------------------------------------------------------

5/10/2024 04:30:19 | server name: [SHS4100]
5/10/2024 04:30:19 | version: 7.1.2 (Sep 12 2018, 08:39:32)
5/10/2024 04:30:19 | initialize system startup   please wait ... 
5/10/2024 04:30:22 * ---------------------------------------------------------------------------------------------
5/10/2024 04:30:22 * ----------------------------------------- Status -----------------------------------------
5/10/2024 04:30:22 * Booting ...
5/10/2024 04:30:24 | HWCheck : open cgos lib: 1.3.15 / 1.2.19
5/10/2024 04:30:24 | HWCheck : open cgos board: IUKL
5/10/2024 04:30:25 | remote started
5/10/2024 04:30:25 | available job disk space for D:\JobPath: 2015 MB
5/10/2024 04:30:25 | available system disk space: 11875 MB
5/10/2024 04:30:25 | License : Virtual Repeat
5/10/2024 04:30:25 | Booting video kernel ...
5/10/2024 04:30:25 | System ID: 001395310fbb
5/10/2024 04:30:25 | start checking devices ...
5/10/2024 04:30:25 | CANopen: AMICanMaster created
5/10/2024 04:30:32 | CANopen: AMICanMaster check Bus
5/10/2024 04:30:32 | CANopen: AMICanMaster reboot nodes
5/10/2024 04:30:36 | CANopen: AMICanMaster start nodes
5/10/2024 04:30:40 | CANopen: AMICanMaster Node Ready : index : 16 (16)
5/10/2024 04:30:40 | CANopen: AMICanMaster Node Ready : index : 61 (61)
5/10/2024 04:30:40 | CANopen: AMICanMaster Node Ready : index : 71 (71)
5/10/2024 04:30:40 | CANopen: started by AMI
5/10/2024 04:30:40 | found AMI
5/10/2024 04:30:40 | found: ID: 16 -CanPc- Vendor: BST eltromat International Class Sub: AMI NetNo: 0
5/10/2024 04:30:40 | check CAN bus controller ...
5/10/2024 04:30:40 | CANopen bus controller ok : AMI
5/10/2024 04:30:40 | found: Id: 61 -Trav- Vendor: BST eltromat International Class Sub: camboard
5/10/2024 04:30:40 | found: Id: 61 -Lens- Vendor: BST eltromat International Class Sub: camboard
5/10/2024 04:30:40 | found: Id: 71 -Sync- Vendor: BST eltromat International Class Sub: AMI (advanced machine interface)
5/10/2024 04:30:40 | found: Id: 61 -Flash- Vendor: BST eltromat International Class Sub: camboard
5/10/2024 04:31:00 | Tracefiles zip: "D:\SHS4100Log.txt" nach "E:\BSTe_SHS4100_TraceFiles_5.10.2024.zip" (ret:0)
5/10/2024 04:31:04 | Tracefiles zip: "D:\SHS4100Log--01.txt" nach "E:\BSTe_SHS4100_TraceFiles_5.10.2024.zip" (ret:0)
5/10/2024 04:31:12 | Tracefiles zip: "D:\SHS4100Log--02.txt" nach "E:\BSTe_SHS4100_TraceFiles_5.10.2024.zip" (ret:0)
5/10/2024 04:31:16 | Tracefiles zip: "D:\SHS4100Log--03.txt" nach "E:\BSTe_SHS4100_TraceFiles_5.10.2024.zip" (ret:0)
5/10/2024 04:31:21 | Tracefiles zip: "D:\SHS4100Log--04.txt" nach "E:\BSTe_SHS4100_TraceFiles_5.10.2024.zip" (ret:0)
5/10/2024 04:31:26 | Tracefiles zip: "D:\SHS4100Log--05.txt" nach "E:\BSTe_SHS4100_TraceFiles_5.10.2024.zip" (ret:0)
5/10/2024 04:31:29 | Tracefiles zip: "C:\Program Files\BST\SHS4000\Settings\AmiSetting.xml" nach "E:\BSTe_SHS4100_TraceFiles_5.10.2024.zip" (ret:0)
5/10/2024 04:31:32 | Tracefiles zip: "C:\Program Files\BST\SHS4000\Settings\AmiSettingsBackup 1.xml" nach "E:\BSTe_SHS4100_TraceFiles_5.10.2024.zip" (ret:0)
5/10/2024 04:31:35 | Tracefiles zip: "E:\BSTe_SHS4100_Trace_5.10.2024.rtf" nach "E:\BSTe_SHS4100_TraceFiles_5.10.2024.zip" (ret:0)
5/10/2024 04:31:35 | found: - 0 device(s) on GigE-LV - 
5/10/2024 04:31:35 | open GigEVision library
5/10/2024 04:31:36 | open GigEVision system: Ver.: 1.2 System: Leutron Vision GenTL Interface
5/10/2024 04:31:41 | found: -GigEVision-LV- Vendor: Leutron Vision Class Sub: Ethernet port cameraIP : 192.168.1.55
5/10/2024 04:31:41 | found: - 1 device(s) on GigEVision-LV - 
5/10/2024 04:31:41 | found CamCFGFile : C:\Program Files\BST\SHS4000\ConfigPath\Cam1.cfg
5/10/2024 04:31:41 | found: Id: 129 -Cam- Vendor: LV Class Sub: GigEVision camera Type: mvBlueCOUGAR-X122C  IP : 192.168.1.55
5/10/2024 04:31:41 | create: -FrameGrb- Vendor: BST Class Sub: virtual device
5/10/2024 04:31:41 | found: Id: 151 -RS232Pc- Vendor: BST eltromat International Class Sub: RS232
5/10/2024 04:31:41 | found: Id: 161 -EPL- Vendor: BST eltromat International Class Sub: External Position Link
5/10/2024 04:31:41 | starting devices ...
5/10/2024 04:31:41 | AMI / CAN-AMI
5/10/2024 04:31:41 | CANopen: AMICanMaster check Bus
5/10/2024 04:31:41 | CANopen: AMICanMaster reboot nodes
5/10/2024 04:31:45 | CANopen: AMICanMaster start nodes
5/10/2024 04:31:49 | CANopen: AMICanMaster Node Ready : index : 16 (16)
5/10/2024 04:31:49 | CANopen: AMICanMaster Node Ready : index : 61 (61)
5/10/2024 04:31:49 | CANopen: AMICanMaster Node Ready : index : 71 (71)
5/10/2024 04:31:49 | camboard / traverse
5/10/2024 04:32:00 | Trav : Homing successfully finished
5/10/2024 04:32:00 | Trav : set operation mode to positioning
5/10/2024 04:32:01 | camboard  SW: 3.1.3   		( HWId:1/1, DevID:65/0, Firmware:3.1.3  , BootLoader:0 )
5/10/2024 04:32:01 | Traverselength: 1135incr.
5/10/2024 04:32:01 | camboard / optical lens
5/10/2024 04:32:02 | Lens Reference   - Zoom : 573 / 420  - Iris : 450 / 164  - Focus : 567 / 164
5/10/2024 04:32:03 | VC 2000 IO/Sync-Board / machine syncronization
5/10/2024 04:32:03 | camboard / flash control unit
5/10/2024 04:32:03 | Ethernet port / LV-SDS
5/10/2024 04:32:03 | GigEVision camera / mvBlueCOUGAR-X122C
5/10/2024 04:32:06 | start GigEVision camera : SW:1.6.123.0 IP:192.168.1.55
5/10/2024 04:32:07 | virtual device / framegrabber
5/10/2024 04:32:07 | RS232 / IO port
5/10/2024 04:32:07 | External Position Link / IO Port
5/10/2024 04:32:07 | starting devices ok
5/10/2024 04:32:07 | devices ready to use
5/10/2024 04:32:07 | Web speed limit for analyses;  enable: 20m/min  disable: 10m/min
5/10/2024 04:32:07 | Number of connected cameras: 1
5/10/2024 04:32:07 | BC : Load Greyscale calibration
5/10/2024 04:32:07 | grey scale (R) fixed calibration data loaded, using cam #1, LV-P203GIGE
5/10/2024 04:32:07 | grey scale (G) fixed calibration data loaded, using cam #1, LV-P203GIGE
5/10/2024 04:32:07 | grey scale (B) fixed calibration data loaded, using cam #1, LV-P203GIGE
5/10/2024 04:32:07 | "White" greyscale calibration calculation successful
5/10/2024 04:32:07 | CM : Load Greyscale calibration
5/10/2024 04:32:07 | grey scale (R) fixed calibration data loaded, using cam #1, LV-P203GIGE
5/10/2024 04:32:07 | grey scale (G) fixed calibration data loaded, using cam #1, LV-P203GIGE
5/10/2024 04:32:07 | grey scale (B) fixed calibration data loaded, using cam #1, LV-P203GIGE
5/10/2024 04:32:07 | database-version: 3.18.1
5/10/2024 04:32:11 | Manual Mode
5/10/2024 04:32:11 | Manual Mode
5/10/2024 04:32:11 | switch to set  Production
5/10/2024 04:32:11 | create job: default
5/10/2024 04:32:11 | Manual Mode
5/10/2024 04:32:11 | switch to set  Production
5/10/2024 04:32:11 | load set  Production
5/10/2024 04:32:11 | load job: default
5/10/2024 04:32:12 | Sync Settings:	JobName:default
5/10/2024 04:32:12 | 			Index:1		Active:1	Modus:16	SyncType:1	Repeat:2048pls	ACS:2048pls
5/10/2024 04:32:12 | 			Gear:1200.0pls	Per:400.0mm	(Inch:	Gear:0.0pls	Per:0.000Inch)
5/10/2024 04:32:12 | 			GearDivider:0	ResetDivider:1	ResetEdge:1
5/10/2024 04:32:12 | Job Settings:	JobName:default
5/10/2024 04:32:12 | 			DwellCount:1	DwellTime:1000	FlipCam:0	Rotate:1	MirrorX:0	MirrorY:0	HR:0
5/10/2024 04:32:12 | 			Traverse#1	LimitLeft:347	LimitRight:837
5/10/2024 04:32:12 | 			Traverse#2	LimitLeft:0	LimitRight:0
5/10/2024 04:32:12 | 			ScanAllPos:0	StartOfRep:	Cam#1:0pls	Cam#2:0pls	ACSScanMode:1
5/10/2024 04:32:12 | 			WebPath:1	WebDir:0	WebDir2:0
5/10/2024 04:32:12 | Videokernel ready now ...
5/10/2024 04:32:12 | reload system settings from database
5/10/2024 04:32:12 | Sync Settings:	JobName:default
5/10/2024 04:32:12 | 			Index:1		Active:1	Modus:16	SyncType:0	Repeat:2048pls	ACS:2048pls
5/10/2024 04:32:12 | 			Gear:1200.0pls	Per:400.0mm	(Inch:	Gear:0.0pls	Per:0.000Inch)
5/10/2024 04:32:12 | 			GearDivider:1	ResetDivider:1	ResetEdge:1
5/10/2024 04:32:12 | Job Settings:	JobName:default
5/10/2024 04:32:12 | 			DwellCount:1	DwellTime:1000	FlipCam:0	Rotate:1	MirrorX:0	MirrorY:0	HR:0
5/10/2024 04:32:12 | 			Traverse#1	LimitLeft:347	LimitRight:837
5/10/2024 04:32:12 | 			Traverse#2	LimitLeft:0	LimitRight:0
5/10/2024 04:32:12 | 			ScanAllPos:0	StartOfRep:	Cam#1:0pls	Cam#2:0pls	ACSScanMode:1
5/10/2024 04:32:12 | 			WebPath:1	WebDir:0	WebDir2:0
5/10/2024 04:32:13 | save system settings to database
5/10/2024 04:32:13 * Load job:  default ok
5/10/2024 04:32:13 * Job:   default
5/10/2024 04:32:13 * Position Set:  Production		Position:  ---	(man)
5/10/2024 04:32:19 | timeout freeze feedback
5/10/2024 04:32:19 | switch to set  Production
5/10/2024 04:32:19 * CBSTControlPanelView::OnUpdateViewLanguage sys:0x409 DB:0x40c
5/10/2024 04:32:19 * Language: CodePage : switch to Codepage: 1252; actual Codepage :1252 
5/10/2024 04:32:24 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
5/10/2024 04:32:25 | process position: -1 (restore)
5/10/2024 04:32:25 | save system settings to database
5/10/2024 04:32:25 * Rappeler un travail:  default ok
5/10/2024 04:32:25 * Travail:   default
5/10/2024 04:32:25 * Mode positions:  Production		Position:  ---	(man)
5/10/2024 04:32:25 | switch to set  Production
5/10/2024 04:32:25 | HWCheck : Controller CPU Temp 53C (Warning Level is 88C, Error Level is 93C), Board Temp 38C
5/10/2024 04:32:25 | HWCheck : Camera 1 Mainboard Temp 51C (Warning Level is 65C Error Level is 70C), Module Temp 47C
