-----------------------------------------------------------------------------------------------------
------------------------------------- Videokernel startup -------------------------------------------
-----------------------------------------------------------------------------------------------------

6/30/2021 10:56:25 | server name: [SHS4000]
6/30/2021 10:56:25 | version: 4.4.2 (Jan 17 2013, 14:04:48)
6/30/2021 10:56:25 | initialize system startup   please wait ... 
6/30/2021 10:56:27 * ---------------------------------------------------------------------------------------------
6/30/2021 10:56:27 * ----------------------------------------- Status -----------------------------------------
6/30/2021 10:56:27 * Booting ...
6/30/2021 10:56:30 | HWCheck : Controller open Itlcd o.k.
6/30/2021 10:56:31 | remote started
6/30/2021 10:56:31 | available job disk space for D:\JobPath: 411 MB
6/30/2021 10:56:31 | available system disk space: 130 MB
6/30/2021 10:56:31 | License : Virtual Repeat
6/30/2021 10:56:32 | License : Dual Camera
6/30/2021 10:56:32 | License : electronic Loupe
6/30/2021 10:56:32 | Booting video kernel ...
6/30/2021 10:56:32 | system ident: 00e0f42bf729
6/30/2021 10:56:32 | save restore database
6/30/2021 10:56:32 | start checking devices ...
6/30/2021 10:56:32 | CANopen: AMICanMaster created
6/30/2021 10:56:34 | CANopen: AMICanMaster check Bus
6/30/2021 10:56:34 | CANopen: AMICanMaster reboot nodes
6/30/2021 10:56:38 | CANopen: AMICanMaster start nodes
6/30/2021 10:56:42 | CANopen: AMICanMaster Node Ready : index : 16 (16)
6/30/2021 10:56:42 | CANopen: AMICanMaster Node Ready : index : 61 (61)
6/30/2021 10:56:42 | CANopen: AMICanMaster Node Ready : index : 62 (62)
6/30/2021 10:56:42 | CANopen: AMICanMaster Node Ready : index : 71 (71)
6/30/2021 10:56:42 | CANopen: started by AMI
6/30/2021 10:56:42 | found AMI
6/30/2021 10:56:42 | found: ID: 16 -CanPc- Vendor: BST-International Class Sub: AMI NetNo: 0
6/30/2021 10:56:42 | check CAN bus controller ...
6/30/2021 10:56:42 | CANopen bus controller ok : AMI
6/30/2021 10:56:42 | found: Id: 61 -Trav- Vendor: BST-International Class Sub: camboard
6/30/2021 10:56:42 | found: Id: 62 -Trav- Vendor: BST-International Class Sub: camboard
6/30/2021 10:56:43 | found: Id: 61 -Lens- Vendor: BST-International Class Sub: camboard
6/30/2021 10:56:43 | found: Id: 62 -Lens- Vendor: BST-International Class Sub: camboard
6/30/2021 10:56:43 | found: Id: 71 -Sync- Vendor: BST-International Class Sub: AMI (advanced machine interface)
6/30/2021 10:56:43 | found: Id: 61 -Flash- Vendor: BST-International GmbH Class Sub: camboard
6/30/2021 10:56:43 | found: Id: 62 -Flash- Vendor: BST-International GmbH Class Sub: camboard
6/30/2021 10:56:45 | found: -GigE-LV- Vendor: Leutron Vision Class Sub: Ethernet port
6/30/2021 10:56:45 | found: -GigE-LV- Vendor: Leutron Vision Class Sub: Ethernet port
6/30/2021 10:56:45 | found CamCFGFile : C:\Program Files\BST\SHS4000\ConfigPath\Cam1.cfg
6/30/2021 10:56:46 | found: Id: 129 -Cam- Vendor: LV Class Sub: GigE camera Type: PicSight_P203B-GigE  IP : 192.168.1.55
6/30/2021 10:56:46 | create: -FrameGrb- Vendor: BST Class Sub: virtual device
6/30/2021 10:56:46 | found CamCFGFile : C:\Program Files\BST\SHS4000\ConfigPath\Cam2.cfg
6/30/2021 10:56:47 | found: Id: 130 -Cam- Vendor: LV Class Sub: GigE camera Type: PicSight_P203B-GigE  IP : 192.168.2.55
6/30/2021 10:56:47 | create: -FrameGrb- Vendor: BST Class Sub: virtual device
6/30/2021 10:56:47 | found: Id: 151 -RS232Pc- Vendor: BST-International Class Sub: RS232
6/30/2021 10:56:47 | found: Id: 161 -EPL- Vendor: BST-International Class Sub: External Position Link
6/30/2021 10:56:47 | starting devices ...
6/30/2021 10:56:47 | AMI / CAN-AMI
6/30/2021 10:56:47 | CANopen: AMICanMaster check Bus
6/30/2021 10:56:47 | CANopen: AMICanMaster reboot nodes
6/30/2021 10:56:51 | CANopen: AMICanMaster start nodes
6/30/2021 10:56:55 | CANopen: AMICanMaster Node Ready : index : 16 (16)
6/30/2021 10:56:55 | CANopen: AMICanMaster Node Ready : index : 61 (61)
6/30/2021 10:56:55 | CANopen: AMICanMaster Node Ready : index : 62 (62)
6/30/2021 10:56:56 | CANopen: AMICanMaster Node Ready : index : 71 (71)
6/30/2021 10:56:56 | camboard / traverse
6/30/2021 10:57:10 | Trav : Homing successfully finished
6/30/2021 10:57:10 | Trav : set operation mode to positioning
6/30/2021 10:57:11 | camboard  SW: 3.1.3   		( HWId:1/1, DevID:65/0, Firmware:3.1.3  , BootLoader:0 )
6/30/2021 10:57:11 | Traverselength: 1522incr.
6/30/2021 10:57:11 | camboard / traverse
6/30/2021 10:57:24 | Trav : Homing successfully finished
6/30/2021 10:57:25 | Trav : set operation mode to positioning
6/30/2021 10:57:25 | camboard  SW: 3.1.3   		( HWId:1/1, DevID:65/0, Firmware:3.1.3  , BootLoader:0 )
6/30/2021 10:57:25 | Traverselength: 1419incr.
6/30/2021 10:57:25 | camboard / optical lens
6/30/2021 10:57:26 | Lens Reference   - Zoom : 544 / 35  - Iris : 573 / 229  - Focus : 454 / 158
6/30/2021 10:57:27 | camboard / optical lens
6/30/2021 10:57:27 | Lens Reference   - Zoom : 542 / 33  - Iris : 570 / 233  - Focus : 449 / 157
6/30/2021 10:57:28 | VC 2000 IO/Sync-Board / machine syncronization
6/30/2021 10:57:28 | camboard / flash control unit
6/30/2021 10:57:28 | camboard / flash control unit
6/30/2021 10:57:28 | Ethernet port / LV-SDS
6/30/2021 10:57:28 | Ethernet port / LV-SDS
6/30/2021 10:57:28 | GigE camera / PicSight
6/30/2021 10:57:34 | virtual device / framegrabber
6/30/2021 10:57:34 | GigE camera / PicSight
6/30/2021 10:57:39 | virtual device / framegrabber
6/30/2021 10:57:39 | RS232 / IO port
6/30/2021 10:57:39 | External Position Link / IO Port
6/30/2021 10:57:39 | starting devices ok
6/30/2021 10:57:39 | devices ready to use
6/30/2021 10:57:39 | Web speed limit for analyses;  enable: 20m/min  disable: 10m/min
6/30/2021 10:57:39 | Number of connected cameras: 2
6/30/2021 10:57:39 | BC : Load Greyscale calibration
6/30/2021 10:57:39 | grey scale (R) fixed calibration data loaded, using cam #1, LV-P203GIGE
6/30/2021 10:57:39 | grey scale (G) fixed calibration data loaded, using cam #1, LV-P203GIGE
6/30/2021 10:57:39 | grey scale (B) fixed calibration data loaded, using cam #1, LV-P203GIGE
6/30/2021 10:57:39 | "White" greyscale calibration calculation successful
6/30/2021 10:57:39 | grey scale (R) fixed calibration data loaded, using cam #2, LV-P203GIGE
6/30/2021 10:57:39 | grey scale (G) fixed calibration data loaded, using cam #2, LV-P203GIGE
6/30/2021 10:57:39 | grey scale (B) fixed calibration data loaded, using cam #2, LV-P203GIGE
6/30/2021 10:57:39 | "White" greyscale calibration calculation successful
6/30/2021 10:57:39 | CM : Load Greyscale calibration
6/30/2021 10:57:39 | grey scale (R) fixed calibration data loaded, using cam #1, LV-P203GIGE
6/30/2021 10:57:39 | grey scale (G) fixed calibration data loaded, using cam #1, LV-P203GIGE
6/30/2021 10:57:39 | grey scale (B) fixed calibration data loaded, using cam #1, LV-P203GIGE
6/30/2021 10:57:39 | grey scale (R) fixed calibration data loaded, using cam #2, LV-P203GIGE
6/30/2021 10:57:39 | grey scale (G) fixed calibration data loaded, using cam #2, LV-P203GIGE
6/30/2021 10:57:39 | grey scale (B) fixed calibration data loaded, using cam #2, LV-P203GIGE
6/30/2021 10:57:39 | database-version: 3.18.1
6/30/2021 10:57:43 | Manual Mode
6/30/2021 10:57:43 | Manual Mode
6/30/2021 10:57:43 | switch to set: Production
6/30/2021 10:57:43 | create job: default
6/30/2021 10:57:43 | Manual Mode
6/30/2021 10:57:43 | switch to set: Production
6/30/2021 10:57:44 | load job: default
6/30/2021 10:57:46 | Sync Settings:	JobName:default
6/30/2021 10:57:46 | 			Index:1		Active:1	Modus:272	SyncType:1	Repeat:18pls	ACS:240pls
6/30/2021 10:57:46 | 			Gear:1200.0pls	Per:400.0mm	(Inch:	Gear:0.0pls	Per:0.000Inch)
6/30/2021 10:57:46 | 			GearDivider:0	ResetDivider:1	ResetEdge:1
6/30/2021 10:57:46 | Job Settings:	JobName:default
6/30/2021 10:57:46 | 			DwellCount:2	DwellTime:500	FlipCam:0	Rotate:0	MirrorX:0	MirrorY:0	HR:0
6/30/2021 10:57:46 | 			Traverse#1	LimitLeft:164	LimitRight:1287
6/30/2021 10:57:46 | 			Traverse#2	LimitLeft:181	LimitRight:1356
6/30/2021 10:57:46 | 			ScanAllPos:0	StartOfRep:	Cam#1:4pls	Cam#2:4pls	ACSScanMode:1
6/30/2021 10:57:46 | 			WebPath:1	WebDir:1	WebDir2:0
6/30/2021 10:57:46 | Videokernel ready now ...
6/30/2021 10:57:46 | reload system settings from database
6/30/2021 10:57:46 | Sync Settings:	JobName:default
6/30/2021 10:57:46 | 			Index:1		Active:1	Modus:272	SyncType:1	Repeat:18pls	ACS:240pls
6/30/2021 10:57:46 | 			Gear:-1.0pls	Per:254.0mm	(Inch:	Gear:60.0pls	Per:10.000Inch)
6/30/2021 10:57:46 | 			GearDivider:1	ResetDivider:1	ResetEdge:1
6/30/2021 10:57:46 | Job Settings:	JobName:default
6/30/2021 10:57:46 | 			DwellCount:2	DwellTime:500	FlipCam:0	Rotate:0	MirrorX:0	MirrorY:0	HR:0
6/30/2021 10:57:46 | 			Traverse#1	LimitLeft:164	LimitRight:1287
6/30/2021 10:57:46 | 			Traverse#2	LimitLeft:181	LimitRight:1356
6/30/2021 10:57:46 | 			ScanAllPos:0	StartOfRep:	Cam#1:4pls	Cam#2:4pls	ACSScanMode:1
6/30/2021 10:57:46 | 			WebPath:1	WebDir:1	WebDir2:0
6/30/2021 10:57:47 | save system settings to database
6/30/2021 10:57:47 * Load job:  default ok
6/30/2021 10:57:47 * Job:   default
6/30/2021 10:57:47 * Position Set:  Production		Position:  ---	(man)
6/30/2021 10:57:53 | timeout freeze feedback
6/30/2021 10:57:53 | switch to set: Production
6/30/2021 10:57:53 * Language: CodePage : switch to Codepage: 1252; actual Codepage :1252 
6/30/2021 10:57:58 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
6/30/2021 10:57:58 | *** Web stopped ***
6/30/2021 10:57:58 | * Web is now too slow for analyses! *
6/30/2021 10:57:58 | Alarm acknowledge button pressed! Notifying modules (BC,CM,DD,LOC)
6/30/2021 10:57:58 | process position: -1 (restore)
6/30/2021 10:57:59 | save system settings to database
6/30/2021 10:57:59 * Rappeler un travail:  default ok
6/30/2021 10:57:59 * Travail:   default
6/30/2021 10:57:59 * Mode positions:  Production		Position:  ---	(man)
6/30/2021 10:57:59 | switch to set: Production
6/30/2021 10:57:59 | HWCheck : Controller CPU Temp 36C (Warning Level is 88C, Error Level is 95C), Board Temp 26C
6/30/2021 10:57:59 | HWCheck : Camera 1 Mainboard Temp 27C (Warning Level is 65C Error Level is 70C), Module Temp 25C
6/30/2021 10:58:00 | HWCheck : Camera 2 Mainboard Temp 27C (Warning Level is 65C Error Level is 70C), Module Temp 24C
6/30/2021 10:58:05 | capture lock : timeout; / BPositionMgr6966
6/30/2021 10:58:10 | Capture failed : got no trigger; Camera 2 (GigE:Timeout)
6/30/2021 10:58:20 | timeout freeze feedback
6/30/2021 10:58:21 | Capture failed : got no trigger; Camera 2 (GigE:Timeout)
6/30/2021 10:58:31 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
6/30/2021 10:58:41 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
6/30/2021 10:58:44 | Manual Mode
6/30/2021 10:58:46 | simulation test mode on
6/30/2021 10:58:48 | simulation test mode on
6/30/2021 10:58:49 | save system settings to database
6/30/2021 10:58:52 | Capture failed : got no trigger; Camera 1 (GigE:Timeout)
6/30/2021 10:58:52 | *** Web started moving ***
6/30/2021 10:58:52 | * Web is now fast enough for analyses! *
6/30/2021 11:00:31 | Manual Mode
6/30/2021 11:00:47 | simulation test mode off
6/30/2021 11:00:57 | reload system settings from database
6/30/2021 11:00:58 | Capture failed : got no trigger; Camera 2 (GigE:Timeout)
6/30/2021 11:01:08 | Capture failed : got no trigger; Camera 2 (GigE:Timeout)
6/30/2021 11:01:08 | Manual Mode
6/30/2021 11:01:14 | save system settings to database
6/30/2021 11:01:14 * Language: CodePage : switch to Codepage: 1252; actual Codepage :1252 
6/30/2021 11:01:25 | reload system settings from database
6/30/2021 11:01:26 | reload system settings from database
6/30/2021 11:01:27 | reload system settings from database (2)
6/30/2021 11:01:37 | Capture failed : got no trigger; Camera 2 (GigE:Timeout)
6/30/2021 11:01:48 | Capture failed : got no trigger; Camera 2 (GigE:Timeout) (2)
6/30/2021 11:01:55 | Manual Mode
6/30/2021 11:01:58 | Capture failed : got no trigger; Camera 2 (GigE:Timeout)
6/30/2021 11:02:02 | client unlink ID= 0, [SHS4000]
6/30/2021 11:02:02 | total remote connects: 0
6/30/2021 11:02:02 | Manual Mode
6/30/2021 11:02:09 | close External Position Link / IO Port
6/30/2021 11:02:09 | close RS232 / IO port
6/30/2021 11:02:09 | close virtual device / framegrabber
6/30/2021 11:02:09 | close GigE camera / PicSight
6/30/2021 11:02:10 | close virtual device / framegrabber
6/30/2021 11:02:10 | close GigE camera / PicSight
6/30/2021 11:02:12 | close Ethernet port / LV-SDS
6/30/2021 11:02:12 | close Ethernet port / LV-SDS
6/30/2021 11:02:12 | close camboard / flash control unit
6/30/2021 11:02:12 | close camboard / flash control unit
6/30/2021 11:02:12 | close VC 2000 IO/Sync-Board / machine syncronization
6/30/2021 11:02:12 | close camboard / optical lens
6/30/2021 11:02:12 | close camboard / optical lens
6/30/2021 11:02:12 | close camboard / traverse
6/30/2021 11:02:16 | close camboard / traverse
6/30/2021 11:02:19 | close AMI / CAN-AMI
6/30/2021 11:02:21 | Closing video kernel ...
6/30/2021 11:02:21 | memorized last check object
6/30/2021 11:02:21 | all check objects deleted
6/30/2021 11:02:22 | Video kernel closed now ...
6/30/2021 11:02:24 | Video kernel closed now ...
remove file : D:\SHS4000Log--05.txt
rename file : D:\SHS4000Log--04.txt to : D:\SHS4000Log--05.txt
rename file : D:\SHS4000Log--03.txt to : D:\SHS4000Log--04.txt
rename file : D:\SHS4000Log--02.txt to : D:\SHS4000Log--03.txt
rename file : D:\SHS4000Log--01.txt to : D:\SHS4000Log--02.txt
rename file : D:\SHS4000Log.txt to : D:\SHS4000Log--01.txt
