21/06/2021 10:55:14 | server name: [PREMIUS]
21/06/2021 10:55:14 | version: 105.32.9 (Persistent Database) (May 23 2011, 16:30:05)
21/06/2021 10:55:15 | Available job disk space  D:\JobPath:  156446 MB
21/06/2021 10:55:15 | Available system disk space:  35761 MB
21/06/2021 10:55:14 | Register Presetting: License found
21/06/2021 10:55:15 | Barcode: Invalid Demo License found exp. date: 29.2.2012
21/06/2021 10:55:15 | Color Monitoring: License found
21/06/2021 10:55:15 | Defect Detection: Invalid Demo License found exp. date: 29.6.2015
21/06/2021 10:55:15 | Locator: Invalid Demo License found exp. date: 29.6.2015
21/06/2021 10:55:15 | Booting video kernel ...
21/06/2021 10:55:16 | system ident: 0030489d750c
21/06/2021 10:55:16 | remote started
21/06/2021 10:55:16 | client link ID= 13141116, [PREMIUS]
21/06/2021 10:55:16 | total remote connects: 1
21/06/2021 10:55:18 | start checking devices ...
21/06/2021 10:55:18 | Current Directory C:\Program Files\BST\Genius\ConfigPath
21/06/2021 10:55:18 | CAN bus master.cfg ok
21/06/2021 10:55:28 | found: Id: 16 -CanPc- Vendor: ESD GmbH Class Sub: CAN-PCI / 331-1
21/06/2021 10:55:28 | found: Id: 17 -CanRegPc- Vendor: ESD GmbH Class Sub: CAN-PCI / 331-0
21/06/2021 10:55:28 | Basic CAN bus controller for register control ok
21/06/2021 10:55:28 | found: Id: 81 -Trav- Vendor: SIG Positec Class Sub: IclA D065
21/06/2021 10:55:28 | found: Id: 86 -Trav- Vendor: SIG Positec Class Sub: IclA D065
21/06/2021 10:55:28 | found: Id: 61 -Lens- Vendor: BST-International Class Sub: VC 2000 KAM-Board
21/06/2021 10:55:28 | found: Id: 71 -Sync- Vendor: BST-International Class Sub: VC 2000 IO/Sync-Board
21/06/2021 10:55:28 | found: Id: 61 -Flash- Vendor: BST-International GmbH Class Sub: VC 2000 KAM-Board
21/06/2021 10:55:28 | printunits installed: 8
21/06/2021 10:55:28 | found: Id: 0 -Reg- Vendor: BST-International Class Sub: Register-Control Can-Standard 32Bit 1m 
21/06/2021 10:55:31 | found: -IEEE1394- Vendor: Unibrain Class Sub: Fire Board 400
21/06/2021 10:55:31 | found CamCFGFile : C:\Program Files\BST\Genius\ConfigPath\Cam1.cfg
21/06/2021 10:55:31 | Camera1 : SONY DFW SX 900   S/N : 100550
21/06/2021 10:55:31 | found: Id: 129 -Cam- Vendor: SONY Class Sub: DFW SX 900
21/06/2021 10:55:31 | create: -FrameGrb- Vendor: BST Class Sub: virtual device
21/06/2021 10:55:31 | notfound: -FrameGrb- 
21/06/2021 10:55:31 | found: Id: 151 -RS232Pc- Vendor: BST-International Class Sub: RS232
21/06/2021 10:55:31 | found: Id: 161 -Futec- Vendor: BST-International Class Sub: Futec
21/06/2021 10:55:31 | found: Id: 171 -ChartInterface- Vendor: BST-International Class Sub: ChartInterface
21/06/2021 10:55:33 | starting devices ...
21/06/2021 10:55:33 | CAN-PCI / 331-1 / IO port
21/06/2021 10:55:34 | CAN-PCI / 331-0 / IO port
21/06/2021 10:55:34 | IclA D065 / traverse
21/06/2021 10:56:05 | Total turn on time: 6585 h
21/06/2021 10:56:05 | Number of positionings: 3538128
21/06/2021 10:56:05 | Traverselength 2307
21/06/2021 10:56:05 | IclA D065 / traverse
21/06/2021 10:56:16 | Motor blocked or at the end!
21/06/2021 10:56:30 | Motor blocked or at the end!
21/06/2021 10:56:43 | Motor blocked or at the end!
21/06/2021 10:56:56 | Motor blocked or at the end!
21/06/2021 10:57:01 | Total turn on time: 14 h
21/06/2021 10:57:01 | Number of positionings: 48712
21/06/2021 10:57:01 | Traverselength 0
21/06/2021 10:57:01 | VC 2000 KAM-Board / optical lens
21/06/2021 10:57:02 | Lens Reference   - Zoom : 597 / 142  - Iris : 622 / 642  - Focus : 627 / 66
21/06/2021 10:57:02 | VC 2000 IO/Sync-Board / machine syncronization
21/06/2021 10:57:03 | CanOpen abort domain!
21/06/2021 10:57:03 | CanOpen abort domain! (2x)
21/06/2021 10:57:04 | VC 2000 KAM-Board / flash control unit
21/06/2021 10:57:04 | Register-Control Can-Standard 32Bit 1m  / 
21/06/2021 10:57:04 | Fire Board 400 / IO port
21/06/2021 10:57:04 | DFW SX 900 / camera
21/06/2021 10:57:10 | Camera : SONY DFW SX 900 Sw Rev. DFW-SX900 v1.02B
21/06/2021 10:57:10 | Camera : SONY DFW SX 900 Video Format : 1280 x 960
21/06/2021 10:57:11 | start camera receive engine on channel 0 ; Fi: FIREi_STATUS_SUCCESS
21/06/2021 10:57:11 | virtual device / framegrabber
21/06/2021 10:57:11 | RS232 / IO port
21/06/2021 10:57:11 | Futec / 
21/06/2021 10:57:11 | ChartInterface / 
21/06/2021 10:57:11 | starting devices ok
21/06/2021 10:57:11 | devices ready to use
21/06/2021 10:57:11 | Number of connected cameras: 1
21/06/2021 10:57:11 | Loaded lens distortion cal. file "C:\Program Files\BST\Genius\ConfigPath\Caldata1.bin"
21/06/2021 10:57:11 | File format V1.5, file created on 18/03/2015 at 13:14:53, using cam #1, DFW-SX900, S/N "100550"
21/06/2021 10:57:11 | Cam #1: MeasureRegister ( big marks ) will use a PixelSize of 7.25 mils/pixel = 184 micrometer/pixel
21/06/2021 10:57:11 | These calibration flags (0x00000001) are set for camera #1, meaning:
21/06/2021 10:57:11 | --- Geometry calibration was made with big pixel size warning
21/06/2021 10:57:11 | Loaded lens distortion (small mark) cal. file "C:\Program Files\BST\Genius\ConfigPath\CaldataSmallMark1.bin"
21/06/2021 10:57:11 | File format V1.5, file created on 18/03/2015 at 13:15:09, using cam #1, DFW-SX900, S/N "100550"
21/06/2021 10:57:11 | Cam #1: MeasureRegister ( small marks ) will use a PixelSize of 4.76 mils/pixel = 121 micrometer/pixel
21/06/2021 10:57:11 | These calibration flags (0x00000001) are set for camera #1, meaning:
21/06/2021 10:57:11 | --- Geometry calibration was made with big pixel size warning
21/06/2021 10:57:11 | Autoregister: Enabling fast mark search by default
21/06/2021 10:57:11 | Loaded grey scale (R) cal. file "C:\Program Files\BST\Genius\ConfigPath\CaldataGreyscaleR1.bin"
21/06/2021 10:57:11 | File format V1.5, file created on 07/10/2011 at 17:14:29, using cam #1, DFW-SX900, S/N "100550"
21/06/2021 10:57:11 | Cam #1: DFW-SX900, S/N "100550" Iris position for white flash: 512
21/06/2021 10:57:11 | Loaded grey scale (G) cal. file "C:\Program Files\BST\Genius\ConfigPath\CaldataGreyscaleG1.bin"
21/06/2021 10:57:11 | File format V1.5, file created on 07/10/2011 at 17:14:30, using cam #1, DFW-SX900, S/N "100550"
21/06/2021 10:57:11 | Loaded grey scale (B) cal. file "C:\Program Files\BST\Genius\ConfigPath\CaldataGreyscaleB1.bin"
21/06/2021 10:57:11 | File format V1.5, file created on 07/10/2011 at 17:14:32, using cam #1, DFW-SX900, S/N "100550"
21/06/2021 10:57:11 | "White" greyscale calibration calculation successful
21/06/2021 10:57:11 | DD Special Application found "0" (no special app). Using standard defect detection
21/06/2021 10:57:11 | DD Texture detection will assume image stability 100 on a scale of 0 to 100
21/06/2021 10:57:11 | DD System Setup: Texture and Misregister detection are disabled (raw 0)
21/06/2021 10:57:11 | Loaded zoom function cal. file "C:\Program Files\BST\Genius\ConfigPath\CaldataZoomfunction1.bin"
21/06/2021 10:57:11 | File format V1.5, file created on 07/10/2011 at 17:27:23, using cam #1, DFW-SX900, S/N "100550"
21/06/2021 10:57:11 | Warp function file "C:\Program Files\BST\Genius\ConfigPath\CaldataView1.bin" not found
21/06/2021 10:57:11 | LoadLensCal: Camera 1 uses 98 zoom and 0 warp calibration control points
21/06/2021 10:57:12 | database-version: 3.20.8
21/06/2021 10:57:12 | switch to set: Production
21/06/2021 10:57:12 | create job: Default
21/06/2021 10:57:12 | switch to set: Production
21/06/2021 10:57:12 | Video kernel ready now ...
21/06/2021 10:57:12 | reload system settings from database
21/06/2021 10:57:12 | switch to set: Production
21/06/2021 10:57:14 | *** Web stopped ***
21/06/2021 10:57:14 | * Web is now too slow for analyses! *
21/06/2021 10:57:14 | Alarm acknowledge button pressed! Notifying modules (BC,CM,DD,LOC)
21/06/2021 10:57:14 | process position: -1 (restore last state)
21/06/2021 10:57:16 | BChartInterface: Serial Interface COM4 connected
